If You Already Have A Pair Of Sunglasses
If you already have a pair of aviator sunglasses the first thing you want to do is take a look at the inside of one of the temples. One way to find your aviator sunglasses size is to look at the inside of one of the temples. Usually the measurements for the eye (lens width), bridge width and temple length can be found stamped on the inside of one of the temples. If you don't find these measurements another place to try is to turn the sunglasses upside down and look at the bottom side of the bridge - you may find those measurements there.
How Manufacturers Label Sunglasses SizesManufacturers label the size of their aviator sunglasses according to the width at the widest part of the sunglasses lenses. If the width of the lens is 52mm, then that pair of sunglasses are sold as 52mm sunglasses. Confused? Of course - the width of the sunglasses lens doesn't really tell you much about how wide the frame is which is what most of you want to know. Let us help you.
First Measure The Sunglasses Lens Size
Next Measure The Sunglasses Bridge Size
How To Measure The Bridge Size In A Pair Of Aviator Sunglasses[/caption]The second measurement is across the bridge of the sunglasses frame. The bridge is that part between each of the lenses of the sunglasses, and is the part that extends across the wearer's nose. This should be the distance between the lenses at their narrowest point. The measurement should be in millimeters, and this measurement is then added to the sum of the two sunglasses lens measurements. By way of example, if each lens measures 55mm across and the bridge measures an additional 12 millimeters, at this point we have a total measurement of 122mm or roughly 4.8 inches.
Now Measure The Hinge JointsThis is a bit trickier because the hinge joints extend out from the eye wire frame on both sides of the entire eye wire frame. Once again you should measure in millimeters. We then take the sum of the two hinge joints in millimeters and add them to the sum of the two sunglasses lenses in millimeters plus the nose bridge measurement in millimeters. If this measurement totals 140mm then the frame size - temple to temple - will be 5.50 inches.
A Simpler MethodThe easiest way to measure for the proper sized aviators is to simply stand in front of a mirror and, using a ruler, measure across the front of your face - temple to temple - in inches. This measurement should give you a good idea of the proper sized aviators for you to purchase. If the measurement is approximately 5.25" then you should choose 55mm-57mm sunglasses, if the measurement is closer to 6.00" then 58-61mm would be best.
A General RuleAs a general rule aviator sunglasses size comes as a 52mm size (5.00" or small - typically women/small men); 55mm (5.25" or regular) and 58mm (5.75" or large).
If You Purchase On This Website
If, for some reason, the pair you purchase don't fit just right we will cheerfully exchange them for the correct size - AND, we will pay the USPS Priority Mail shipping back to us for the exchange PLUS the return shipping to you.. On the other hand, should you decide you don't like or want the pair of sunglasses you have purchased, simply let us know and we will arrange for you to return them for a full refund - no questions asked!
Have a prosperous day!
p.s. Please share "How To Choose The Proper Aviator Sunglasses Size" with your friends using the buttons below. Thanks!