Skip to content


Your cart is empty

How To Install StickTite Stick-On Lenses

How to apply StickTite Instant Reading Lenses to your sunglasses:

To begin with:

  1. First, ensure that your glasses are clean and free from dust prior to application;
  2. Next, spray one side of the lens with a cleaning solution like Purity lens cleaner;
  3. Water can be used if you don’t have a lens cleaner, however cleaning with water will take longer for the lens to dry;
  4. If you need a good lens cleaner and microfiber cloth just visit our website where you will find a great product for keeping your lenses clean.

Next, install the brand-new stick-on lenses:

  1. Place the lenses wet side down onto the inside of your glasses or sunglasses;
  2. Press the lens firmly to squeeze out the lens solution;
  3. If bubbles are present, press and rub the lens in a small circular motion until all the bubbles are removed.


  1. Adjust and test the lenses as needed by sliding them just below the bridge with your thumb;
  2. Once you reach the desired placement allow 15 minutes for the lenses to fully dry and bond with your glasses or sunglasses.

If it helps you can watch a good video on YouTube:

I hope your installation of these lenses goes smoothly.

If, for any reason, you have a problem, just let us know and we will help you.

In the meantime, keep your eyes safe and focused on what's ahead of you Hersch!