Skip to content

Free Shipping, Returns & Exchanges (USA) ONLY

Main Navigation

How To Install StickTite Stick-On Lenses

How to apply StickTite Instant Reading Lenses to your sunglasses:

To begin with:

  1. First, ensure that your glasses are clean and free from dust prior to application;
  2. Next, spray one side of the lens with a cleaning solution like Purity lens cleaner;
  3. Water can be used if you don’t have a lens cleaner, however cleaning with water will take longer for the lens to dry;
  4. If you need a good lens cleaner and microfiber cloth just visit our website where you will find a great product for keeping your lenses clean.

Next, install the brand-new stick-on lenses:

  1. Place the lenses wet side down onto the inside of your glasses or sunglasses;
  2. Press the lens firmly to squeeze out the lens solution;
  3. If bubbles are present, press and rub the lens in a small circular motion until all the bubbles are removed.

Finally:

  1. Adjust and test the lenses as needed by sliding them just below the bridge with your thumb;
  2. Once you reach the desired placement allow 15 minutes for the lenses to fully dry and bond with your glasses or sunglasses.

If it helps you can watch a good video on YouTube:

I hope your installation of these lenses goes smoothly.

If, for any reason, you have a problem, just let us know and we will help you.

In the meantime, keep your eyes safe and focused on what's ahead of you Hersch!

 

Something went wrong, please contact us!
Subtotal